1. Atsushi Hosoi, Hiroyuki Kawada, Fatigue life prediction for transverse crack initiation of CFRP cross-ply and quasi-isotropic laminates, Materials, 2018, 11(7), 1182, p.1-16 (doi:10.3390/ma11071182)．
  2. Kristine M. Jespersen, Jens A. Glud, Jens Zangenberg, Atsushi Hosoi, Hiroyuki Kawada, Lars P. Mikkelsen, Uncovering the fatigue damage initiation and progression in uni-directional non-crimp fabric reinforced polyester composite, Composites Part A: Applied Science and Manufacturing, 2018, 109, 481-497 (doi.org/10.1016/j.compositesa.2018.03.002)．
  3. Kristine M. Jespersen, Jens A. Glud, Jens Zangenberg, Atsushi Hosoi, Hiroyuki Kawada, Lars P. Mikkelsen, Ex-situ X-ray computed tomography, tension clamp and in-situ transilluminated white light imaging data of non-crimp fabric based fiber composite under fatigue loading, Date in Brief, 2018, Vol 21, p.228-233 (doi.org/10.1016/j.dib.2018.09.109).
  4. Kristine M. Jespersen, Chung, J.C, Okamoto Kazuki, Abe Hikaru, Hosoi Atsushi, Kawada Hiroyuki，Damage mechanisms of directly bonded carbon fibre reinforced thermoplastics and aluminium with nanostructured surface，IOP Conference Series: Materials Science and Engineering，2018，Vol 388，Issue 1．(doi.org/10.1088/1757-899X/388/1/012011).
  5. Eiichi Hamada , Yuto Furuya , Atsushi Hosoi , Yuji Morita , Hiroyuki Kawada, Influences of Plasticity-Induced Crack Closure on Fatigue Crack Healing of Carbon Steel With Heat Treatment, ASME International Mechanical Engineering Congress and Exposition,2018,Vol 12 (doi.org/10.1115/IMECE2018-86650).
  6. 金太成，酒井貴広，星雄大，二川秀史，細井厚志，川田宏之，電気めっき処理によるカーボンナノチューブ/銅複合配線の創製および許容電流評価，日本機械学会論文集, 2018, 84(857), 17-00313 (doi.org/10.1299/transjsme.17-00313).
  7. 金太成，林晏理，二川秀史，白須圭一，山本剛，橋田俊之，細井厚志，川田宏之，無撚カーボンナノチューブ糸の機械的特性に及ぼす黒鉛化の影響と強度発現機構，日本機械学会論文集，2018，84 (860)，p.17-00585 (doi.org/10.1299/transjsme.17-00585).
  8. 新井智貴，福島槙一郎，世木選，細井厚志，川田宏之，一方向および擬似等方層間高靭性化厚肉CFRP積層板の面外方向疲労特性に及ぼす応力比の影響，日本機械学会論文集, 2018, 84(863), p. 18-00039 (doi.org/10.1299/transjsme.18-00039).
  9. 白木伶治，岡本彪，小澤憲人，金太成，平山紀夫，谷口憲彦，西脇剛史，細井厚志，川田宏之，強化繊維径および界面特性を考慮したGF/PA射出成形材の引張強度予測，日本機械学会論文集, 2018, 84(860), p. 17-00582 (doi.org/10.1299/transjsme.17-00582).



  1. Kristine Munk Jespersen, Leif E. Asp, Atsushi Hosoi, Hiroyuki Kawada, Lars P. Mikkelsen, "X-ray tomography based finite element modelling of non-crimp fabric based fibre composite", 18th European Conference on Composite Materials, Athens, Greece, June 24-28，2018.
  2. Keisuke Oba, Yoshihiko Arao, Atsushi Hosoi, Hiroyuki Kawada, "Enhancing mechanical properties of graphene/epoxy nanocomposites using few-layer graphene produced by liquid phase exfoliation", 18th European Conference on Composite Materials (ECCM2018), Athens, Greece, June 24-282018.
  3. Atsushi Hosoi, Shinichiro Fukushima, Yoshihiro Higashikata, Dai Tsunoda, Naoki Sugiura, Takahiro Hayashi, Hiroyuki Kawada, "Fatigue damage growth behavior of quasi-isotropic CF/PEEK and CF/Epoxy laminates", the 7th International Conference on Fatigue of Composites (ICFC7), Vicenza, Italy, July-4-6 2018.
  4. Kazuki Okamoto, Joon Cheol Chung, Hikaru Abe, Atsushi Hosoi, Naoki Ishida, Shingo Matsukawa, Kristine Munk Jespersen, Hiroyuki Kawada," Direct bonding between carbon fiber reinforced thermoplastics and aluminum alloys and its soundness evaluation by non-contact ultrasonic testing", 26th International Conference on Composites/Nano Engineering (ICCE-26), Paris, France, July 15-21 2018.
  5. Taesung Kim, Hidefumi Nikawa, Atsushi Hosoi, Hiroyuki Kawada, "Effect of intermolecular force on mechanical properties of CNT/polymer composite yarn", The 5th International Conference on Nanomechanics and Nanocomposites (ICNN5),Fukuoka, Japan, August 22-25 2018.
  6. Kristine Munk Jespersen, Jooncheol Chung, Kazuki Okamoto, Hikaru Abe, Atsushi Hosoi, Hiroyuki Kawada, "Damage mechanisms of directly bonded carbon fibre reinforced thermoplastics and aluminium with nanostructured surface", 39th Riso International Symposium on Materials Science, IOP Conf. Series: Materials Science and Engineering 388 (2018) 012011, Roskilde, Denmark, September 3-6 2018.
  7. Yuta Hoshi, Kotaro Kajihara, Tae Sung Kim, Atsushi Hosoi, Hiroyuki Kawada, "Fabrication of lightweight Cu/untwisted MWCNT yarn composite with high current capacity value" ,ASC 33rd Annual Technical Conference and 18th US-Japan Conference on Composite Materials, Seattle, Washington , USA，Septmeber 24-26 2018.
  8. Takuro Suzuki, Atsushi Hosoi, Yoshinobu Shimamura, Terumasa Tsuda, Hiroyuki Kawada, "Evaluation of Giga-Cycle Fatigue Characteristics of CFRP Cross-ply Laminates Using Ultrasonic Fatigue Testing", ASC 33rd Annual Technical Conference and 18th US-Japan Conference on Composite Materials, Seattle, Washington , USA，Septmeber 24-26 2018.
  9. Shogo Adachi, Tomoya Yabu, Yuji Ishitsuka, Masato Nishi, Atsushi Hosoi, Hiroyuki Kawada, "Progressive failure simulations considering effect of the test temperature for long-glass-fiber thermoplastic composites", the 13th China-Japan Joint Conference on Composite Materials (CJJCC-13), Lan Zhou, China, October 20-25 2018.
  10. Shuhei Koshima, Norihiro Kajii, Atsushi Hosoi, Hiroyuki Kawada, "Evaluation of influence of seawater immersion on fatigue strength reduction of plain woven CFRP laminates", the 13th China-Japan Joint Conference on Composite Materials (CJJCC-13), Lanzhou, China, October 20-25 2018.
  11. Eiichi Hamada, Yuto Furuya, Atsushi Hosoi, Yuji Morita, Hiroyuki Kawada, "Influences of plasticity-induced crack closure on fatigue crack healing of carbon steel with heat treatment", the ASME 2018 International Mechanical Engineering Congress and Exposition (IMECE2018), Pittsburgh, Pennsylvania, USA, November 9-15 2018..
  12. Tatsuya Kimura, Hinako Ozaki, Akiya Ozeki, Hirohide Shiratori, Michimasa Uda, Yoshio Hasegawa, Akiko Koshizaka, Atsushi Hosoi, Hiroyuki Kawada, "Mechanical properties and microstructural fracture behaviors of SiC fiber fabricated by dry spinning method", The 5th Asian Symposium on Materials and Processing (ASMP2018), Bangkok, Thailand, December 7-8 2018.
  13. Dai Tsunoda, Shinichiro Fukushima, Yoshihiro Higashikata, Atsushi Hosoi, Naoki Sugiura, Takahiro Hayashi, Hiroyuki Kawada, "Evaluation of transverse crack propagation in CF/modified PEEK laminates under fatigue loading", The 5th Asian Symposium on Materials and Processing (ASMP2018),, Bangkok, Thailand, December 7-8 2018.
  14. Kouichi Okumo, Tae Sung Kim, Kazuhiko Takahashi, Atsushi Hosoi, Hiroyuki Kawada, "CVD synthesis of few-walled carbon nanotubes for creating high-strength untwisted carbon nanotube yarn", 2018 2nd International Conference on Mechanical Engineering and Applied Composite Materials (MEACM2018)6, Harbin, China, December 7-8 2018.
  15. Kensuke Nakaso, Atsushi Hosoi, Hiroyuki Kawada, "Effect of grafting graphene onto carbon fiber by using chemical bond on graphene/CF's mechanical properties", 2018 2nd International Conference on Mechanical Engineering and Applied Composite Materials (MEACM2018), Harbin, China, December 7-8 2018.



  1. 尾関皓哉，木村達哉，白鳥弘英，宇田道正，長谷川良雄，越坂亜希子，細井厚志，川田宏之，「乾式紡糸法によるSiC 繊維の焼成条件が機械的特性に及ぼす影響」，第9回日本複合材料会議（JCCM-9)，京都，2018年2-3月．
  2. 丁埈澈，岡本和起，阿部輝，細井厚志，川田宏之，「アルミニウム合金A5052とCFRTP積層板の接着強度特性に及ぼす界面ナノ構造の影響」，第9回日本複合材料会議（JCCM-9)，京都，2018年2-3月．
  3. 金太成，林晏理，細井厚志，川田宏之，「無撚CNT紡績糸の力学特性に及ぼすCNT間相互作用因子の分子動力学解析」，第9回日本複合材料会議（JCCM-9)，，京都，2018年2-3月．
  4. 新井智貴，渥美建，細井厚志，川田宏之，「切込入りプリプレグを用いたCFRPリブ構造の静的引張負荷下における損傷挙動に及ぼす積層構成の影響」，第9回日本複合材料会議（JCCM-9)，京都，2018年2-3月．
  5. 岡本彪，伊藤瑛洲，山田誠司，佐野一教，矢部宏幸，漆崎優，平山紀夫，細井厚志，川田宏之，「ガラス繊維強化熱可塑性樹脂の樹脂及び界面処理剤の違いが界面特性に及ぼす影響」，第9回日本複合材料会議（JCCM-9），京都，2018年2-3月．
  6. 白鳥弘英，尾関皓哉，木村達哉，宇田道正，長谷川良男，越坂亜希子，細井厚志，川田宏之，「乾式紡糸法と溶融紡糸法により作製したSiC繊維の機械的特性評価」第9回日本複合材料会議（JCCM-9）京都，2018年2-3月．
  7. 白木伶治，安達正悟，南部歩太，彌武朋也，石塚勇二，細井厚志，川田宏之，「GFRTPの衝撃エネルギー吸収に及ぼす試験温度および強化形態の影響」，第9回日本複合材料会議（JCCM-9），京都，2018年2-3月．
  8. 林晏理，十河和嘉，金太成，二川秀史，細井厚志，川田宏之，｢黒鉛化CNT/PAN複合繊維の創製および機械的特性評価｣，第9回日本複合材料会議(JCCM-9)，京都，2018年2-3月．
  9. 梶井憲弘，甲嶋秀平，細井厚志，眞道幸司，島隆夫，川田宏之，「海水浸漬させた平織CFRP積層板の疲労特性評価」，日本航空宇宙学会第60回構造強度に関する講演会，徳島，2018年8月．
  10. 中曽健輔，細井厚志，川田宏之，「共有結合を用いて複合化した炭素繊維上のグラフェンが機械的特性に与える影響」，日本航空宇宙学会第60回構造強度に関する講演会，徳島，2018年8月．
  11. 和田啓汰，阿部暉，Kristine Munk Jespersen，細井厚志，川田宏之，「アルミニウム合金とCFRTPの接着強度に及ぼす表面ナノ構造の影響」，日本材料学会2018年度JCOM若手シンポジウム，神奈川，2018年8月．
  12. 小林陸人，堀内誠大，細井厚志，貴志公博，川田宏之，「Ti-6Al-4V合金の疲労き裂治癒技術の開発と治癒効果に及ぼす疲労き裂閉口現象の影響」，日本機械学会 機械材料・材料加工部門 第26回機械材料・材料加工技術講演会（M&P2018），山形，2018年11月．
  13. 奥茂洸一，金太成，高橋和彦，細井厚志，川田宏之，「高強度無撚 CNT 糸の創製に向けた薄層 CNT 合成条件の検討」，日本機械学会 機械材料・材料加工部門 第26回機械材料・材料加工技術講演会(M&P2018)，山形，2018年11月．
  14. 宮田雅文，鈴木芽生，藤本允仁，細井厚志，江藤和也，杉山哲也，川田宏之，「現場重合型フェノキシ樹脂を母材とする連続繊維強化複合材料の引張強度特性に及ぼす内部欠陥及び母材樹脂の重合度の影響」，第26回機械材料・材料加工技術講演会(M&P2018)，山形，2018年11月．
  15. 阿部暉，大田宙起，齊藤慧，和田啓汰，Kristine Munk Jespersen，細井厚志，川田宏之，「アルミニウム合金とCFRTP積層板の直接接着継手における破壊靱性の評価」，第26回機械材料・材料加工技術講演会(M&P2018)，山形，2018年11月．



>>このページのトップへ